FoamMatch
For Contractors →

Spray Foam Insulation in Bremerton, WA

Find top-rated spray foam contractors and save up to 35% on energy bills

💰 Estimated Energy Savings in Bremerton

35%
Average Energy Savings
Typical range: 30% - 40%
$1,596
Estimated Annual Savings
Based on $380/month average energy cost
4 years
Average Payback Period
Return on investment timeline

Note: Actual savings vary based on home size, current insulation, energy rates, and climate conditions. These estimates are based on Department of Energy data for Cold.

Verified Contractors in Bremerton

Kitsap Insulation

📞 Call Now

Direct: 3603775500

5⭐
6 Google reviews

Recent Reviews:

Mark Chamberlin★★★★★2 years ago

Taleah★★★★★3 months ago

Craig is the kindest and most hard working man he is a lovely business owner and as a business owner myself he is always putting his best foot forwards trying to help me in all different aspects of life weather it’s taxes, painting my car or life advice. He is a bright light in my day every time I see him! Thank you for all you do :)

Robert P★★★★★2 years ago

MY PROJECT: At 2-story 1992 vintage house, clear existing blocked attic soffit vents, repair existing or install new insulation baffles, add loose-fill fiberglass insulation to R-49, and seal attic access hatch. PROS: o Professional, knowledgeable, competent, and courteous staff, David in particular, who conducted initial site inspection and also supervised/performed site work. o Great communications with owner Craig Connell. o Offered lowest bid price of three total bidders. Price extremely reasonable for scope of work. o Timely kept all scheduled appointments. o Accurate time estimates to complete work. o Took great care protecting house interior from work impacts, and satisfactorily cleaned interior areas unavoidably affected by work. o Provided detailed instructions and forms, including pre-addressed and stamped envelope, to apply for $1,500 Cascade Natural Gas rebate. Now that's service!!! CONS: No internet presence (website). BOTTOM LINE: I recommend Kitsap Insulation Services without hesitation.

C & F Insulation Inc

📞 Call Now🌐 Visit Website

Direct: 3606810480

4.2⭐
5 Google reviews

Recent Reviews:

Carolita McGee★★★★★2 years ago

We're so happy with our newly insulated cabin. To get to it can be a bit of a squeeze, but impressively with a bit of dedication, the team made it & did a great job. Our cabin stayed super cool during the summer, without AC, especially during the high temps. We're sure it'll keep us warm & cozy in the winter. Thank you to the entire team of C & F Insulation & Hunter & his co-worker at Pacific Spray System for your professionalism & for going above & beyond! Highly recommend!

Christopher Thompson★★★★★6 years ago

Had my garage attic blown insulated, the young men who did the job were respectful and professional. Good job they even shot insulation in between the ceiling and the plywood walkway in 24x24 attic huge difference in heat not escaping. Thanks Chris Thompson. Port angels.

Katrina Vaughan★★★★★3 years ago

We had them insulate our mobile home and they did a superb job, they weren’t as prompt getting us a estimate but they saved us over $1000 using them

Frequently Asked Questions — Spray Foam Insulation in Bremerton

How much can spray foam insulation save on heating and cooling bills in Bremerton?▼
Homeowners in mixed climates like Bremerton, WA typically see 20–30% reductions in total energy costs after spray foam installation. The savings come from both reduced heating in winter and reduced cooling in summer. The exact savings depend on your home's current insulation, size, and local energy rates, but most homeowners recoup the investment within 3–6 years.
Is spray foam better than fiberglass insulation for homes in Bremerton?▼
For most homes in Bremerton, WA, spray foam outperforms fiberglass significantly. Fiberglass batts insulate but do not air seal — meaning conditioned air still escapes through gaps. Spray foam both insulates and creates an airtight seal, addressing the root cause of energy loss. While spray foam costs more upfront, the performance difference in mixed climates makes it the better long-term investment for most homeowners.
Is spray foam insulation worth the cost?▼
For most homeowners, yes. Spray foam creates an air-tight seal that traditional insulation cannot match, reducing energy bills by 15–35% annually. It also adds structural rigidity, acts as a moisture and vapor barrier, reduces outside noise, and can increase home resale value. The higher upfront cost compared to fiberglass is typically recovered within 3–7 years. One important note: because spray foam creates a very tight building envelope, proper mechanical ventilation is important to maintain healthy indoor air quality and prevent interior moisture buildup. This is typically handled by an Energy Recovery Ventilator (ERV) — a system that brings fresh outside air in while pushing stale air out, recovering the energy from the outgoing air so you don't waste what you paid to heat or cool — or a Heat Recovery Ventilator (HRV), which works similarly but is optimized for cold climates. A qualified contractor will assess whether your home needs ventilation upgrades as part of the installation.
How much does spray foam insulation cost?▼
Spray foam insulation typically costs $1.00–$3.00 per square foot installed, depending on the type and your location. Open-cell foam runs $0.44–$0.65 per board foot, while closed-cell foam costs $1.00–$2.00 per board foot. A typical 2,000 sq ft home attic costs $2,000–$6,000. Most homeowners recoup this investment within 3–7 years through energy savings of 15–35% annually.
What is the difference between open-cell and closed-cell spray foam?▼
Open-cell spray foam is softer, less dense, and less expensive. It expands significantly and is ideal for interior walls, attics, and soundproofing. Closed-cell spray foam is denser, stronger, and provides a moisture barrier — making it better for exterior applications, crawl spaces, and areas prone to flooding or humidity. Closed-cell also has a higher R-value per inch (R-6 to R-7 vs R-3.5 to R-4 for open-cell). One key difference: open-cell foam allows some vapor movement, while closed-cell acts as a vapor barrier — an important consideration for your home's ventilation needs.
How long does spray foam insulation last?▼
Spray foam insulation is one of the most durable insulation options available, with a lifespan of 80+ years when properly installed. Unlike fiberglass batting which can sag and settle over time, spray foam maintains its shape and insulating properties indefinitely. It will typically outlast the building it is installed in.
How do I find a qualified spray foam insulation contractor?▼
Look for contractors who are licensed, insured, and have verifiable reviews. Spray foam requires specialized equipment and training — improper installation can cause off-gassing, adhesion failure, or fire hazards. Ask for references, verify their insurance, and get at least 2–3 quotes. A qualified contractor will also assess your home's ventilation needs — a tightly sealed spray foam installation requires adequate mechanical ventilation to prevent moisture and indoor air quality issues. FoamMatch pre-screens all listed contractors for licensing and insurance so you can compare verified professionals in your area.
How long does spray foam installation take?▼
Most residential spray foam jobs take 1–2 days depending on the size of the area. A standard attic takes 4–8 hours. After spraying, the foam cures within 24 hours, though most contractors recommend waiting 24–72 hours before occupying the space due to off-gassing during the curing process.
Does spray foam insulation need to be replaced?▼
No — spray foam insulation does not need to be replaced under normal circumstances. Unlike fiberglass insulation which degrades over time, spray foam maintains its R-value and air sealing properties for the life of the building. The only reasons to remove or replace spray foam are water damage, renovation work, or improper original installation.
← Browse All Cities