Spray Foam Insulation in Boynton Beach, FL

Find top-rated spray foam contractors and save up to 25% on energy bills

Compare 2 verified spray foam insulation contractors serving Boynton Beach, Florida, backed by 12 customer reviews averaging 4.5★. Whether you're insulating a new build, retrofitting an existing home, or upgrading attic and crawl-space insulation, these pre-screened Boynton Beach contractors handle both open-cell and closed-cell spray foam. Homeowners here typically cut energy bills by around 25% — get free quotes and read verified reviews below.

💰 Estimated Energy Savings in Boynton Beach

25%
Average Energy Savings
Typical range: 20% - 30%
$960
Estimated Annual Savings
Based on $320/month average energy cost
5 years
Average Payback Period
Return on investment timeline

Note: Actual savings vary based on home size, current insulation, energy rates, and climate conditions. These estimates are based on Department of Energy data for Very-Hot-Humid.

Verified Contractors in Boynton Beach

Recent Reviews:

Roxanne Henderson★★★★★3 months ago

I hired PHA Attic Insulation & Roofing Services Boynton Beach, FL for attic cleaning and roofing repair, and they were amazing. Isaac explained the benefits of spray foam insulation and foam insulation, and after installation, our home became much more comfortable. They also performed mold removal in the attic, which gave us peace of mind. Their roofing team did roofing cleaning and roofing maintenance, and the difference was noticeable right away. We also learned about their metal roof installers, who would be a great choice when we’re ready to replace roof shingles. The team was friendly, skilled, and very professional. I’m beyond satisfied with the results and recommend PHA Attic Insulation & Roofing Services Boynton Beach, FL for both attic and roofing needs.

Kuldeep Chand★★★★★2 months ago

PHA Attic Insulation & Roofing Services Boynton Beach came on to replace the insulation in my attic crawl space. The air conditioner recently broke on this floor, so it is extremely hot and the space they were working in was tight, but they got the job done! The area was left clean and they carefully worked around electrical wires and had it cleaned. True professionals! highly recommended!

Regam Santhikumari★★★★★4 months ago

Ben from PHA Attic Insulation Services Boynton Beach, FL was incredibly honest, intelligent, and helpful. He took the time to inspect our very extensive mold and water issues carefully, sat down with us and patiently explained what was happening, and even seemed personally upset by the scope of damage. He was the kind of person you want addressing issues in your home someone who puts himself in your place and addresses things like they were happening to his own loved one. We would definitely highly recommend this attic insulation services and mold removal.

4
4 Google reviews

Recent Reviews:

Quig★★★★★7 months ago

Karl V.★★★★★2 years ago

Batt insulation for new construction house. Did a solid job. Got every bit of information needed from the office staff, who was also responsive. Crew was thorough and courteous to me.

Kalani Wheeler★★★★★4 years ago

Great company with a great staff! Whatever your insulation or gutter needs are they will take care of it for you!

Frequently Asked Questions — Spray Foam Insulation in Boynton Beach

These are the questions Boynton Beach homeowners ask most about spray foam cost, R-value, and open- vs. closed-cell foam — with context for local pricing and roughly 25% typical energy savings. Compare the 2 verified Boynton Beach contractors above for exact quotes.

Is spray foam insulation worth the cost?
For most homeowners, yes. Spray foam creates an air-tight seal that traditional insulation cannot match, reducing energy bills by 15–35% annually. It also adds structural rigidity, acts as a moisture and vapor barrier, reduces outside noise, and can increase home resale value. The higher upfront cost compared to fiberglass is typically recovered within 3–7 years. One important note: because spray foam creates a very tight building envelope, proper mechanical ventilation is important to maintain healthy indoor air quality and prevent interior moisture buildup. This is typically handled by an Energy Recovery Ventilator (ERV) — a system that brings fresh outside air in while pushing stale air out, recovering the energy from the outgoing air so you don't waste what you paid to heat or cool — or a Heat Recovery Ventilator (HRV), which works similarly but is optimized for cold climates. A qualified contractor will assess whether your home needs ventilation upgrades as part of the installation.
How much does spray foam insulation cost in Boynton Beach, FL?
In Boynton Beach, FL and the surrounding area, spray foam insulation typically costs $1.00–$3.00 per square foot installed, depending on the type and your home's specifics. Open-cell foam runs $0.44–$0.65 per board foot, while closed-cell foam costs $1.00–$2.00 per board foot. A typical 2,000 sq ft home attic in Boynton Beach costs $2,000–$6,000. Most Boynton Beach homeowners recoup this investment within 3–7 years through energy savings of 15–35% annually.
What is the difference between open-cell and closed-cell spray foam?
Open-cell spray foam is softer, less dense, and less expensive. It expands significantly and is ideal for interior walls, attics, and soundproofing. Closed-cell spray foam is denser, stronger, and provides a moisture barrier — making it better for exterior applications, crawl spaces, and areas prone to flooding or humidity. Closed-cell also has a higher R-value per inch (R-6 to R-7 vs R-3.5 to R-4 for open-cell). One key difference: open-cell foam allows some vapor movement, while closed-cell acts as a vapor barrier — an important consideration for your home's ventilation needs.
How long does spray foam insulation last?
Spray foam insulation is one of the most durable insulation options available, with a lifespan of 80+ years when properly installed. Unlike fiberglass batting which can sag and settle over time, spray foam maintains its shape and insulating properties indefinitely. It will typically outlast the building it is installed in.
How do I find a qualified spray foam insulation contractor in Boynton Beach, FL?
When searching for a spray foam contractor in Boynton Beach, FL, look for ones who are licensed, insured, and have verifiable reviews. Spray foam requires specialized equipment and training — improper installation can cause off-gassing, adhesion failure, or fire hazards. Ask for references, verify their insurance, and get at least 2–3 quotes. A qualified Boynton Beach contractor will also assess your home's ventilation needs — a tightly sealed spray foam installation requires adequate mechanical ventilation to prevent moisture and indoor air quality issues. FoamMatch pre-screens all listed contractors in Boynton Beach for licensing and insurance so you can compare verified professionals in your area.
How long does spray foam installation take?
Most residential spray foam jobs take 1–2 days depending on the size of the area. A standard attic takes 4–8 hours. After spraying, the foam cures within 24 hours, though most contractors recommend waiting 24–72 hours before occupying the space due to off-gassing during the curing process.
Does spray foam insulation need to be replaced?
No — spray foam insulation does not need to be replaced under normal circumstances. Unlike fiberglass insulation which degrades over time, spray foam maintains its R-value and air sealing properties for the life of the building. The only reasons to remove or replace spray foam are water damage, renovation work, or improper original installation.