Spray Foam Insulation in Beverly Hills, CA

Find top-rated spray foam contractors and save up to 35% on energy bills

💰 Estimated Energy Savings in Beverly Hills

35%
Average Energy Savings
Typical range: 30% - 40%
$1,596
Estimated Annual Savings
Based on $380/month average energy cost
4 years
Average Payback Period
Return on investment timeline

Note: Actual savings vary based on home size, current insulation, energy rates, and climate conditions. These estimates are based on Department of Energy data for Cold.

Verified Contractors in Beverly Hills

Beverly Hills Services

Direct: 4245010245

5
5 Google reviews

Recent Reviews:

Gavin M★★★★★in the last week

If you have an older home and need better insulation, I highly recommend Beverly Hills Services. After looking at our options, we decided to go with their foam insulation instead of tearing out our walls, and we’re very happy we did. Since getting the insulation installed, our house warms up much faster and stays comfortable for much longer. Rooms that used to be colder than the rest are now the same temperature as the rest of the house. We used to feel drafts around the windows and throughout the house, but that’s completely gone now. Another big improvement is how much quieter it is inside—the outside noise has been reduced a lot, so we don’t need a fan for white noise anymore. It’s made a big difference in our everyday comfort. The team, including Brett and Ian, worked hard to keep everything clean. The inside installation can get a little messy, but they made sure to clean up well when they finished. The outside part of the job was much easier and left hardly any mess at all. Right after the work was done, we noticed a big drop in noise from the street, and our house held the heat much better at night. We set the thermostat before bed, and by morning, the temperature barely changed, with the heater not even turning on during the night. That never happened before. We also noticed that rooms like our laundry room and downstairs bathroom, which used to be chilly, are now just as comfortable as the rest of the home. Installing insulation with this company has really improved how our house feels, both in temperature and quietness. We’re very satisfied and recommend them to anyone looking to improve their home’s insulation.

Mackenzie Swanson★★★★★2 months ago

I hired an insulation contractor to blow fiberglass insulation into the attic above my three-car garage in Beverly Hills. They responded quickly to my first inquiry and answered all my follow-up questions right away. Brett provided me with a detailed estimate the same day I reached out, and their pricing was much better than another quote I had received, so I decided to go with them without looking further. I had already installed soffit baffles myself, so their team just needed to handle the insulation installation. Scheduling was simple, and they were flexible in working around my busy calendar. The crew, including Ian and Brett, arrived on time after calling ahead with their estimated arrival. They were very friendly, professional, and worked efficiently to get the job done. The finished insulation looked excellent, and they even applied it a couple of inches deeper than I expected, which was a nice bonus, especially for keeping the house cooler in the Beverly Hills heat. The team was careful to make sure the insulation stayed clear of the overflow drain pans for the water heater and AC, preventing any future issues. They also took care to clean up all the extra insulation that landed in the garage. Their attention to detail was impressive. Overall, I highly recommend this insulation company for anyone looking to improve their home's energy efficiency and comfort.

Kathleen Horton★★★★★a week ago

i recently had an insulation contractor come out to improve the blown-in fiberglass insulation in my home. years ago, the insulation work was only partially completed, and during a recent inspection, it was discovered that the wall cavities were not fully filled. i reached out to the company to discuss how to address the issue, and their estimator, brett, responded right away. brett came over to assess the situation, confirmed more insulation was needed, and quickly arranged for the crew to return. a few days later, the technicians arrived and did their best to fill in the remaining gaps, even with limited access to the cavity spaces. the team was very professional, courteous, and easy to work with. they took responsibility for the previous incomplete job and fixed it without any extra charges. their commitment to customer satisfaction and quality work really stood out to me. this is a trustworthy insulation contractor with a long history of serving the local area. if you need insulation work in your home to keep cool during the hot california summers, i highly recommend this company. they truly care about their customers and stand behind their work, even years later.

Attic Cleaning Beverly Hills

Direct: 3104925083

WarmVantage Systems

Direct: 3107080757

Frequently Asked Questions — Spray Foam Insulation in Beverly Hills

How much can spray foam insulation save on heating and cooling bills in Beverly Hills?
Homeowners in mixed climates like Beverly Hills, CA typically see 20–30% reductions in total energy costs after spray foam installation. The savings come from both reduced heating in winter and reduced cooling in summer. The exact savings depend on your home's current insulation, size, and local energy rates, but most homeowners recoup the investment within 3–6 years.
Is spray foam better than fiberglass insulation for homes in Beverly Hills?
For most homes in Beverly Hills, CA, spray foam outperforms fiberglass significantly. Fiberglass batts insulate but do not air seal — meaning conditioned air still escapes through gaps. Spray foam both insulates and creates an airtight seal, addressing the root cause of energy loss. While spray foam costs more upfront, the performance difference in mixed climates makes it the better long-term investment for most homeowners.
Is spray foam insulation worth the cost?
For most homeowners, yes. Spray foam creates an air-tight seal that traditional insulation cannot match, reducing energy bills by 15–35% annually. It also adds structural rigidity, acts as a moisture and vapor barrier, reduces outside noise, and can increase home resale value. The higher upfront cost compared to fiberglass is typically recovered within 3–7 years. One important note: because spray foam creates a very tight building envelope, proper mechanical ventilation is important to maintain healthy indoor air quality and prevent interior moisture buildup. This is typically handled by an Energy Recovery Ventilator (ERV) — a system that brings fresh outside air in while pushing stale air out, recovering the energy from the outgoing air so you don't waste what you paid to heat or cool — or a Heat Recovery Ventilator (HRV), which works similarly but is optimized for cold climates. A qualified contractor will assess whether your home needs ventilation upgrades as part of the installation.
How much does spray foam insulation cost?
Spray foam insulation typically costs $1.00–$3.00 per square foot installed, depending on the type and your location. Open-cell foam runs $0.44–$0.65 per board foot, while closed-cell foam costs $1.00–$2.00 per board foot. A typical 2,000 sq ft home attic costs $2,000–$6,000. Most homeowners recoup this investment within 3–7 years through energy savings of 15–35% annually.
What is the difference between open-cell and closed-cell spray foam?
Open-cell spray foam is softer, less dense, and less expensive. It expands significantly and is ideal for interior walls, attics, and soundproofing. Closed-cell spray foam is denser, stronger, and provides a moisture barrier — making it better for exterior applications, crawl spaces, and areas prone to flooding or humidity. Closed-cell also has a higher R-value per inch (R-6 to R-7 vs R-3.5 to R-4 for open-cell). One key difference: open-cell foam allows some vapor movement, while closed-cell acts as a vapor barrier — an important consideration for your home's ventilation needs.
How long does spray foam insulation last?
Spray foam insulation is one of the most durable insulation options available, with a lifespan of 80+ years when properly installed. Unlike fiberglass batting which can sag and settle over time, spray foam maintains its shape and insulating properties indefinitely. It will typically outlast the building it is installed in.
How do I find a qualified spray foam insulation contractor?
Look for contractors who are licensed, insured, and have verifiable reviews. Spray foam requires specialized equipment and training — improper installation can cause off-gassing, adhesion failure, or fire hazards. Ask for references, verify their insurance, and get at least 2–3 quotes. A qualified contractor will also assess your home's ventilation needs — a tightly sealed spray foam installation requires adequate mechanical ventilation to prevent moisture and indoor air quality issues. FoamMatch pre-screens all listed contractors for licensing and insurance so you can compare verified professionals in your area.
How long does spray foam installation take?
Most residential spray foam jobs take 1–2 days depending on the size of the area. A standard attic takes 4–8 hours. After spraying, the foam cures within 24 hours, though most contractors recommend waiting 24–72 hours before occupying the space due to off-gassing during the curing process.
Does spray foam insulation need to be replaced?
No — spray foam insulation does not need to be replaced under normal circumstances. Unlike fiberglass insulation which degrades over time, spray foam maintains its R-value and air sealing properties for the life of the building. The only reasons to remove or replace spray foam are water damage, renovation work, or improper original installation.