Spray Foam Insulation in Quinlan, TX

Find top-rated spray foam contractors and save up to 27% on energy bills

Compare verified spray foam insulation contractors serving Quinlan, Texas. Whether you're insulating a new build, retrofitting an existing home, or upgrading attic and crawl space insulation, our pre-screened Quinlan contractors specialize in both open-cell and closed-cell spray foam. Get free quotes and read verified reviews from Quinlan homeowners.

💰 Estimated Energy Savings in Quinlan

27%
Average Energy Savings
Typical range: 22% - 32%
$1,134
Estimated Annual Savings
Based on $350/month average energy cost
5 years
Average Payback Period
Return on investment timeline

Note: Actual savings vary based on home size, current insulation, energy rates, and climate conditions. These estimates are based on Department of Energy data for Hot-Dry.

Verified Contractors in Quinlan

4.9
85 Google reviews

Recent Reviews:

Sheila Newton★★★★★5 months ago

We recently had the pleasure of working with Shawn (the owner) and Michael (the spray tech) at Spray Foam Insulation of Texas, and we couldn’t be happier with the results! Shawn came out promptly to give us a quote and was very thorough and professional. Once we decided to move forward, he returned to do a detailed walk-through. We had just had our workshop floors epoxied and were concerned about protecting them during the spray process. Shawn walked us through exactly how they would safeguard the floors, which gave us a lot of peace of mind. When Michael arrived to do the spraying, he went above and beyond to ensure everything was protected. He did an exceptional job — the workshop and attached game room look absolutely amazing! The spray foam coverage is clean, crisp, and professional with no mess or overspray. We highly recommend Shawn and Michael at Spray Foam Insulation of Texas. Their attention to detail, professionalism, and quality of work are top-notch!

Adam Irrgang★★★★★10 months ago

Fantastic contractor. Great personalities, price, workmanship, and cleanup. I'm building a 3,200 square foot custom home that my wife and I have been planning and saving for for more than a decade. We knew we wanted foam insulation for the higher R-value, the better sealing against bugs, the efficiency gained from including the HVAC ducts within the insulated volume, and especially for the fringe benefit of having a sealed attic rather than a ventilated attic. We designed our house to make good use of this improved attic with a permanent stairway to the attic and an extra 1,000 square feet of usable floor space up there for very little extra effort or cost, enabled by the choice to use foam insulation. Not finished living space, but it could be converted to that in the future like people do up North with basements. So after framing was done, I started getting bids to find the best insulation contractor. First I tried another company that a friend recommended, but the owner gave me very little confidence and a price that was higher than I had anticipated. I tried a second company, but they gave me an even higher price, and had such aggressive personalities, I couldn't stand the thought of hiring them - it was sure to get ugly at some point. Shawn Ballard's company, Spray Foam Insulation of Texas, was the third bid I got. My wife found him from Google reviews. Shawn made a great impression over the phone. I asked him if I could look at the job he was working the day I called him. After he checked with the owner, he gave me the address. His crew was spraying a custom home that had a lot in common with mine. Michael was on the spray gun and was happy to show me the process. His skill and workmanship were excellent. Impressed with what I saw, I invited Shawn out to bid my house. I showed him all my unique concerns and requests, and he had solutions in mind for everything. So much more pleasant to interact with than either of the other competitors, and I knew the results would be great from the job site I visited. I was overjoyed to see that Shawn's price was nearly 30% lower than the competitors! Of course I hired him. I had to wait my turn in line, but after the three days it took to spray my house, the results still exceeded my expectations. The masking, spraying, and cleanup were all expert and thorough. They trimmed the foam nicely without damaging any wiring. They got the foam everywhere it needed to go and nowhere it shouldn't have. They insulated a few interior walls at my request for sound damping, insulated my garage, a couple of ceilings, and the attic has even more foam than I was expecting. All interactions were professional and pleasant. I can't recommend this company enough!

Johnny Honeycutt★★★★★4 weeks ago

As a contractor myself I pay very close attention to detail when I hire other contractors. This crew did a phenomenal job on my 60 year old home! Our house was not an easy project, they had to vacuum out all the old cellulose, and then seal up the gables. We have a very low pitched roof, so most of the soffits were extremely hard to get to, but they took the time and effort to get all the way to the edge and properly insulate the entire roof. Im very happy with the outcome, and the price for the actual amount of work these guys put in was fantastic! Aside from the quality work, the crew were very friendly, showed me how the equipment worked and answered all the questions my curious mind had. Grateful I found them!

Frequently Asked Questions — Spray Foam Insulation in Quinlan

Below are common questions Quinlan, TX homeowners ask about spray foam insulation cost, types, and installation. For local pricing and to compare verified contractors in Quinlan, browse the listings above.

Does spray foam insulation work well in hot dry climates like Quinlan?
Yes — spray foam is highly effective in hot dry climates like Quinlan, TX. While moisture control is less of a concern than in humid climates, the air sealing properties are critical for keeping hot desert air out and cooled air in. In extreme heat climates, an unsealed attic can reach 150°F+, dramatically increasing AC load. Spray foam in the attic can reduce attic temperatures by 30–40°F.
What is the best area of my home to insulate in Quinlan?
In hot dry climates like Quinlan, TX, the attic is typically the highest-impact area to spray foam insulate. Desert sun heats roofs to extreme temperatures, and an uninsulated attic transfers that heat directly into your living space. After the attic, crawl spaces and rim joists are the next highest-impact areas. A local contractor can perform an energy audit to identify where your home loses the most conditioned air.
Is spray foam insulation worth the cost?
For most homeowners, yes. Spray foam creates an air-tight seal that traditional insulation cannot match, reducing energy bills by 15–35% annually. It also adds structural rigidity, acts as a moisture and vapor barrier, reduces outside noise, and can increase home resale value. The higher upfront cost compared to fiberglass is typically recovered within 3–7 years. One important note: because spray foam creates a very tight building envelope, proper mechanical ventilation is important to maintain healthy indoor air quality and prevent interior moisture buildup. This is typically handled by an Energy Recovery Ventilator (ERV) — a system that brings fresh outside air in while pushing stale air out, recovering the energy from the outgoing air so you don't waste what you paid to heat or cool — or a Heat Recovery Ventilator (HRV), which works similarly but is optimized for cold climates. A qualified contractor will assess whether your home needs ventilation upgrades as part of the installation.
How much does spray foam insulation cost in Quinlan, TX?
In Quinlan, TX and the surrounding area, spray foam insulation typically costs $1.00–$3.00 per square foot installed, depending on the type and your home's specifics. Open-cell foam runs $0.44–$0.65 per board foot, while closed-cell foam costs $1.00–$2.00 per board foot. A typical 2,000 sq ft home attic in Quinlan costs $2,000–$6,000. Most Quinlan homeowners recoup this investment within 3–7 years through energy savings of 15–35% annually.
What is the difference between open-cell and closed-cell spray foam?
Open-cell spray foam is softer, less dense, and less expensive. It expands significantly and is ideal for interior walls, attics, and soundproofing. Closed-cell spray foam is denser, stronger, and provides a moisture barrier — making it better for exterior applications, crawl spaces, and areas prone to flooding or humidity. Closed-cell also has a higher R-value per inch (R-6 to R-7 vs R-3.5 to R-4 for open-cell). One key difference: open-cell foam allows some vapor movement, while closed-cell acts as a vapor barrier — an important consideration for your home's ventilation needs.
How long does spray foam insulation last?
Spray foam insulation is one of the most durable insulation options available, with a lifespan of 80+ years when properly installed. Unlike fiberglass batting which can sag and settle over time, spray foam maintains its shape and insulating properties indefinitely. It will typically outlast the building it is installed in.
How do I find a qualified spray foam insulation contractor in Quinlan, TX?
When searching for a spray foam contractor in Quinlan, TX, look for ones who are licensed, insured, and have verifiable reviews. Spray foam requires specialized equipment and training — improper installation can cause off-gassing, adhesion failure, or fire hazards. Ask for references, verify their insurance, and get at least 2–3 quotes. A qualified Quinlan contractor will also assess your home's ventilation needs — a tightly sealed spray foam installation requires adequate mechanical ventilation to prevent moisture and indoor air quality issues. FoamMatch pre-screens all listed contractors in Quinlan for licensing and insurance so you can compare verified professionals in your area.
How long does spray foam installation take?
Most residential spray foam jobs take 1–2 days depending on the size of the area. A standard attic takes 4–8 hours. After spraying, the foam cures within 24 hours, though most contractors recommend waiting 24–72 hours before occupying the space due to off-gassing during the curing process.
Does spray foam insulation need to be replaced?
No — spray foam insulation does not need to be replaced under normal circumstances. Unlike fiberglass insulation which degrades over time, spray foam maintains its R-value and air sealing properties for the life of the building. The only reasons to remove or replace spray foam are water damage, renovation work, or improper original installation.