FoamMatch
For Contractors →

Spray Foam Insulation in Rowlett, TX

Find top-rated spray foam contractors and save up to 27% on energy bills

💰 Estimated Energy Savings in Rowlett

27%
Average Energy Savings
Typical range: 22% - 32%
$1,134
Estimated Annual Savings
Based on $350/month average energy cost
5 years
Average Payback Period
Return on investment timeline

Note: Actual savings vary based on home size, current insulation, energy rates, and climate conditions. These estimates are based on Department of Energy data for Hot-Dry.

Verified Contractors in Rowlett

Affordable Radiant Barrier

📞 Call Now🌐 Visit Website

Direct: 4697778595

5⭐
5 Google reviews

Recent Reviews:

Kaylee Johnson★★★★★a week ago

I can’t say enough good things about this company and the man who runs it. Neal came out to our house personally to look at our home after I told him about our insanely high utility bill our first month in our new home. This is our first home we’ve ever owned and there’s a lot we don’t know. Before Neal even looked in my attics he took the time to help me shop different utility companies and go over what my rates and kilowatt usage should look like. Later that day he emailed me a massive list of utility companies so I can start shopping around for a lower rate. He then checked all of my air vents in our whole house and explained to me about return and supply vents and helped us realize we needed to also be calling our HVAC people out for an inspection. After all of this he thoroughly inspected all of our attic spaces (we have three) and was very honest about his plan for them. He almost does exclusively radiant barrier for attics but he said he wouldn’t do it for ours because we lacked soffits. He took time to explain everything (including what a soffit is) and made sure I understood exactly what his plan was for insulation. Less than 24 hours later he emailed a very reasonable quote. Neal checked in on us multiple times while having our HVAC inspected and seriously he was kind to educate us on so many things. He went above and beyond the call of duty and we wouldn’t want to hire anyone else for the job! This man really cares about the clients he serves!!

Janet Pokladnik★★★★★a month ago

I recently had radiant barrier installed in my home, and I couldn't be more pleased with the results. From start to finish, the entire process was seamless. The installation team was professional, efficient, and incredibly knowledgeable. They took the time to explain the benefits of the radiant barrier and how it would improve my home's energy efficiency. Since the installation, I've noticed a significant reduction in my energy bills and a much more comfortable living environment. Overall, I highly recommend Affordable Radiant Barrier installation service to anyone looking to improve their home's energy efficiency and comfort. It's been a game-changer for me!

Oommen Kunnath★★★★★2 months ago

I’ve hired Neal and his team at Affordable Radiant Barrier for the second time, and I couldn't be happier. A few years ago, they did a great job on my first radiant barrier project, so when I needed my attic insulation topped off, I called them again. Neal is sincere—he walks through the attic and tells you exactly what needs to be fixed without trying to sell you anything you don't need. He also fixed a few areas where the radiant barrier had been damaged during the installation of a new HVAC system. It’s rare to find a contractor in DFW who is this consistent and dependable. If you want it done right the first time (or the second!), call Neal.

Frequently Asked Questions — Spray Foam Insulation in Rowlett

Does spray foam insulation work well in hot dry climates like Rowlett?▼
Yes — spray foam is highly effective in hot dry climates like Rowlett, TX. While moisture control is less of a concern than in humid climates, the air sealing properties are critical for keeping hot desert air out and cooled air in. In extreme heat climates, an unsealed attic can reach 150°F+, dramatically increasing AC load. Spray foam in the attic can reduce attic temperatures by 30–40°F.
What is the best area of my home to insulate in Rowlett?▼
In hot dry climates like Rowlett, TX, the attic is typically the highest-impact area to spray foam insulate. Desert sun heats roofs to extreme temperatures, and an uninsulated attic transfers that heat directly into your living space. After the attic, crawl spaces and rim joists are the next highest-impact areas. A local contractor can perform an energy audit to identify where your home loses the most conditioned air.
Is spray foam insulation worth the cost?▼
For most homeowners, yes. Spray foam creates an air-tight seal that traditional insulation cannot match, reducing energy bills by 15–35% annually. It also adds structural rigidity, acts as a moisture and vapor barrier, reduces outside noise, and can increase home resale value. The higher upfront cost compared to fiberglass is typically recovered within 3–7 years. One important note: because spray foam creates a very tight building envelope, proper mechanical ventilation is important to maintain healthy indoor air quality and prevent interior moisture buildup. This is typically handled by an Energy Recovery Ventilator (ERV) — a system that brings fresh outside air in while pushing stale air out, recovering the energy from the outgoing air so you don't waste what you paid to heat or cool — or a Heat Recovery Ventilator (HRV), which works similarly but is optimized for cold climates. A qualified contractor will assess whether your home needs ventilation upgrades as part of the installation.
How much does spray foam insulation cost?▼
Spray foam insulation typically costs $1.00–$3.00 per square foot installed, depending on the type and your location. Open-cell foam runs $0.44–$0.65 per board foot, while closed-cell foam costs $1.00–$2.00 per board foot. A typical 2,000 sq ft home attic costs $2,000–$6,000. Most homeowners recoup this investment within 3–7 years through energy savings of 15–35% annually.
What is the difference between open-cell and closed-cell spray foam?▼
Open-cell spray foam is softer, less dense, and less expensive. It expands significantly and is ideal for interior walls, attics, and soundproofing. Closed-cell spray foam is denser, stronger, and provides a moisture barrier — making it better for exterior applications, crawl spaces, and areas prone to flooding or humidity. Closed-cell also has a higher R-value per inch (R-6 to R-7 vs R-3.5 to R-4 for open-cell). One key difference: open-cell foam allows some vapor movement, while closed-cell acts as a vapor barrier — an important consideration for your home's ventilation needs.
How long does spray foam insulation last?▼
Spray foam insulation is one of the most durable insulation options available, with a lifespan of 80+ years when properly installed. Unlike fiberglass batting which can sag and settle over time, spray foam maintains its shape and insulating properties indefinitely. It will typically outlast the building it is installed in.
How do I find a qualified spray foam insulation contractor?▼
Look for contractors who are licensed, insured, and have verifiable reviews. Spray foam requires specialized equipment and training — improper installation can cause off-gassing, adhesion failure, or fire hazards. Ask for references, verify their insurance, and get at least 2–3 quotes. A qualified contractor will also assess your home's ventilation needs — a tightly sealed spray foam installation requires adequate mechanical ventilation to prevent moisture and indoor air quality issues. FoamMatch pre-screens all listed contractors for licensing and insurance so you can compare verified professionals in your area.
How long does spray foam installation take?▼
Most residential spray foam jobs take 1–2 days depending on the size of the area. A standard attic takes 4–8 hours. After spraying, the foam cures within 24 hours, though most contractors recommend waiting 24–72 hours before occupying the space due to off-gassing during the curing process.
Does spray foam insulation need to be replaced?▼
No — spray foam insulation does not need to be replaced under normal circumstances. Unlike fiberglass insulation which degrades over time, spray foam maintains its R-value and air sealing properties for the life of the building. The only reasons to remove or replace spray foam are water damage, renovation work, or improper original installation.
← Browse All Cities