FoamMatch
For Contractors →

Spray Foam Insulation in Bellflower, CA

Find top-rated spray foam contractors and save up to 27% on energy bills

💰 Estimated Energy Savings in Bellflower

27%
Average Energy Savings
Typical range: 22% - 32%
$1,134
Estimated Annual Savings
Based on $350/month average energy cost
5 years
Average Payback Period
Return on investment timeline

Note: Actual savings vary based on home size, current insulation, energy rates, and climate conditions. These estimates are based on Department of Energy data for Hot-Dry.

Verified Contractors in Bellflower

Shiffer Insulation

📞 Call Now🌐 Visit Website

Direct: 8776619061

5⭐
6 Google reviews

Recent Reviews:

Benson Collins★★★★★7 months ago

Our garage roof was completely uninsulated, and the heat made it unusable. Shiffer Insulation used foam board under the rafters and batt insulation along the sidewalls. They also covered the space between the joists above the garage door. The space is cooler and usable. The work took a full day and was done professionally. The space is finally functional.

Pierce Harper★★★★★a month ago

We added a new wing with a slanted roofline to our home and wanted top-tier insulation. Before the roofing was finished, foam board panels were used throughout the structure. The precision of the cuts around beams and valleys stood out. Now that the space is complete, it holds temperature beautifully, and there’s no sound echoing during rain. It feels like a completely different build compared to our older section of the home.

Gabriel Lewis★★★★★3 months ago

Our project involved converting a dead storage area into usable living space, and insulation played a huge role. Before drywall went up, Peter and his crew added spray foam between the studs to create a consistent thermal barrier. In the attic above, they used a radiant barrier to reduce heat gain during the summer months. They worked with the framers, electricians, and inspectors, without slowing down the schedule. They also walked us through California’s insulation standards so everyone understood how the R-values were chosen. It was clear they took long-term efficiency seriously, not just rushing through.

Service All-Stars Plumbing Heating and Air Comfort

📞 Call Now🌐 Visit Website

Direct: 4242575561

4.6⭐
8 Google reviews

Recent Reviews:

Maggie Kaplan★★★★★a month ago

Omar and his team are incredible! They installed a complete new HVAC system in my 1950’s ranch style home. Prompt, communicative and professional. I would recommend them to anyone looking for a complete installation or just a tune up. Worth every penny for the peace of mind!! Thank you Omar!

Vincent Cravens★★★★★3 months ago

The company really cares that their employees do an all around excellent job. I previously used Service All-Stars to replace my heater. Now they have installed my A/C unit. They do excellent work.The techs were friendly and informative about the details of the work they were doing. I appreciate the fact the workers worked quietly and efficiently. The owner is receptive to constructive criticism which is a big plus in my book. I will continue to call upon Service All-Stars for my HVAC needs.

Dennis Cottone★★★★★a month ago

The team that Sal sent (Brandon and Evan) did a fantastic job on repiping my 60 year old house here in Long Beach. I found a leak in my tankless water heater closet and called them out to take a look. My house has a slab foundation and turns the leak was coming in from the main-line under the soil and then through the concrete to the water heater closet in the middle of the house. They dug down through the concrete and rather than just asking the guys to patch the galvanized pipes, I figured it best to do a full house re-pipe through my tight attic since the plumbing is 60 years old. Good thing because in the process, another leak was detected in the wall between my bathroom vanities. The guys were friendly and hard-working, the process took 4-5 days and I was informed of where they would have to cut through the walls to connect all the pipes. They definitley routed the pipes in the least invasive way. They also tuned up my HVAC system and tankless water heater while they were here. I would highly recommend Service All-Stars for your plumbing and HVAC needs. -DC

Frequently Asked Questions — Spray Foam Insulation in Bellflower

Does spray foam insulation work well in hot dry climates like Bellflower?▼
Yes — spray foam is highly effective in hot dry climates like Bellflower, CA. While moisture control is less of a concern than in humid climates, the air sealing properties are critical for keeping hot desert air out and cooled air in. In extreme heat climates, an unsealed attic can reach 150°F+, dramatically increasing AC load. Spray foam in the attic can reduce attic temperatures by 30–40°F.
What is the best area of my home to insulate in Bellflower?▼
In hot dry climates like Bellflower, CA, the attic is typically the highest-impact area to spray foam insulate. Desert sun heats roofs to extreme temperatures, and an uninsulated attic transfers that heat directly into your living space. After the attic, crawl spaces and rim joists are the next highest-impact areas. A local contractor can perform an energy audit to identify where your home loses the most conditioned air.
Is spray foam insulation worth the cost?▼
For most homeowners, yes. Spray foam creates an air-tight seal that traditional insulation cannot match, reducing energy bills by 15–35% annually. It also adds structural rigidity, acts as a moisture and vapor barrier, reduces outside noise, and can increase home resale value. The higher upfront cost compared to fiberglass is typically recovered within 3–7 years. One important note: because spray foam creates a very tight building envelope, proper mechanical ventilation is important to maintain healthy indoor air quality and prevent interior moisture buildup. This is typically handled by an Energy Recovery Ventilator (ERV) — a system that brings fresh outside air in while pushing stale air out, recovering the energy from the outgoing air so you don't waste what you paid to heat or cool — or a Heat Recovery Ventilator (HRV), which works similarly but is optimized for cold climates. A qualified contractor will assess whether your home needs ventilation upgrades as part of the installation.
How much does spray foam insulation cost?▼
Spray foam insulation typically costs $1.00–$3.00 per square foot installed, depending on the type and your location. Open-cell foam runs $0.44–$0.65 per board foot, while closed-cell foam costs $1.00–$2.00 per board foot. A typical 2,000 sq ft home attic costs $2,000–$6,000. Most homeowners recoup this investment within 3–7 years through energy savings of 15–35% annually.
What is the difference between open-cell and closed-cell spray foam?▼
Open-cell spray foam is softer, less dense, and less expensive. It expands significantly and is ideal for interior walls, attics, and soundproofing. Closed-cell spray foam is denser, stronger, and provides a moisture barrier — making it better for exterior applications, crawl spaces, and areas prone to flooding or humidity. Closed-cell also has a higher R-value per inch (R-6 to R-7 vs R-3.5 to R-4 for open-cell). One key difference: open-cell foam allows some vapor movement, while closed-cell acts as a vapor barrier — an important consideration for your home's ventilation needs.
How long does spray foam insulation last?▼
Spray foam insulation is one of the most durable insulation options available, with a lifespan of 80+ years when properly installed. Unlike fiberglass batting which can sag and settle over time, spray foam maintains its shape and insulating properties indefinitely. It will typically outlast the building it is installed in.
How do I find a qualified spray foam insulation contractor?▼
Look for contractors who are licensed, insured, and have verifiable reviews. Spray foam requires specialized equipment and training — improper installation can cause off-gassing, adhesion failure, or fire hazards. Ask for references, verify their insurance, and get at least 2–3 quotes. A qualified contractor will also assess your home's ventilation needs — a tightly sealed spray foam installation requires adequate mechanical ventilation to prevent moisture and indoor air quality issues. FoamMatch pre-screens all listed contractors for licensing and insurance so you can compare verified professionals in your area.
How long does spray foam installation take?▼
Most residential spray foam jobs take 1–2 days depending on the size of the area. A standard attic takes 4–8 hours. After spraying, the foam cures within 24 hours, though most contractors recommend waiting 24–72 hours before occupying the space due to off-gassing during the curing process.
Does spray foam insulation need to be replaced?▼
No — spray foam insulation does not need to be replaced under normal circumstances. Unlike fiberglass insulation which degrades over time, spray foam maintains its R-value and air sealing properties for the life of the building. The only reasons to remove or replace spray foam are water damage, renovation work, or improper original installation.
← Browse All Cities